click image to enlarge
Available for hire from TFS
Phonak
TX-300V transmitter
Ideal for use with the Phonak Invisity.
The only wide area FM transmitter you need
The TX-300V is a wide area FM transmitter and perfect for covering large areas such as auditoriums, lecture rooms, houses of worship, town halls, movie theaters, theaters, universities, sports venues, shopping malls, railway stations and other public places.
Its features include
Easy connection
Connections are made through an existing AV system, be it infrared, inductive or FM.
Automatic synchronization with WallPilot
WallPilot is Phonak’s compact, picture-frame-like device, which is located at the entrance to a room and automatically changes FM users’ personal receivers to the frequency used in the venue.
Available with charging suitcase
This suitcase is the ideal accessory for storing, transporting and charging wireless FM products.
Compatible with all Phonak FM receivers
Perfect for any facility with a capacity of over 50 people.
The TX-300V covers the entire frequency range from 150-220 MHz
RF Frequency Range 150-220MHz (Actual frequencies for each unit set by Phonak or authorized representatives)
Number of Channels 20 Maximum
Frequency Accuracy /- .005% stability 0 to 50C
Transmitter Stability 50 PPM
Output Power 50mW, 100mW, 300mW (Actual power for each frequency set by Phonak)
Antenna Dipole Antenna (Included with Transmitter) Cable length: 7.6 m
Antenna Connector BNC
Compliance ETSI EN 300 422-2, ETSI EN 300-454-1, FCC Part 15, Industry Canada
System Distortion <2% total harmonic distortion (THD) at 80% deviation
Audio Input 1 Rear panel. Female-XLR and phone combo connector, balanced, 0/-55 dBu (line/mic) nominal
input level adjustable
Audio Input 2 Rear panel. (2) Phono connectors, unbalanced, -10/+10 dBu nominal input level adjustable,
+30 dBu maximum, impedance 100k ohms
Combined Audio Output (Mix) Rear panel. (2) Phono connectors, unbalanced, 0 dBu nominal output level, +19 dBu maximum,
impedance 10 ohms.
Headphone Output Front panel. (1) 3.5 mm connector, unbalanced, adjustable output level
Front Panel Power, Test Tone on/off, Channel up/down, Input Level, Mix Level, Contour, Headset Level
Rear Panel Input 1 Level (Line, Mic, Mic-Phantom Power), Input 2 Level (-10/+10 dBu), RF Power (low,
mid, high)
Internal Adjustments Compression ratio for audio processor
Programming Processing on/off
Input 1 and Input 2, Mix VU Meters 8 Green, 2 Red
Processing Indicated by a green LED when on
RF Power Indicated on the LCD Display
Power Red LED illuminates when the unit is powered up
LCD Display Channel designation, lock status, RF Power Level, programming
Test Tone Red LED illuminates when test tone enabled
Power Supply Type In-line power supply
Power Supply Input 110-230VAC / 50 Hz
Power Supply Output 12VDC, 1000mA
Power Supply Connector 5.0 mm (.02 in) 2.5 mm (OD x .01 in) ID, barrel type
Compliance CE
Dimensions W x D x H 20.3 x 20 x 4.45cm (8.0 x 8.0 x 1.75 in)
Unit Weight 1.4kg (3.0 lbs)
Unit Weight with LA-201 Power Supply 2.0kg (4.4 lbs)
Shipping Weight 2 kg (5.0 lbs)
Rack Mounting 1 rack unit, optional rack mount not included. Order Phonak part number 116-1940.
Temperature - Operation -10 C (14 F) to +40° (104 F)
Temperature - Storage -20 C (-4 F) to +50° (122 F)
Humidity 0 to 95% relative humidity, non-condensing
Related Products
