converting website visitors
Television, Film Services, sound and vision equipment for hire
Television, Film Services, sound and vision equipment for hire
Television, Film Services, sound and vision equipment for hire
Television, Film Services, sound and vision equipment for hire
call now
0114 249 5902

Hire

Signal processing

Sonifex Red box RB-VHEDD8 3G/HD/SD-SDI De-Embedder, Dolby® E Encoder & Re-Embedder
click image to enlarge

Sonifex Red box RB-VHEDD8 3G/HD/SD-SDI De-Embedder, Dolby® E Encoder & Re-Embedder


RB-VHEDD8

For hire / rental from TFS the new Sonifex Red box RB-VHEDD8 3G/HD/SD-SDI De-Embedder, Dolby® E Encoder & Re-Embedder

The RB-VHEDD8 is an SDI audio de-embedder and re-embedder with Dolby® E Encoding capabilities. Dolby E encodes up to 8 channels of audio into two channels of an AES digital audio stream which is then embedded onto any of the available groups within each of the two video output paths. The encoded Dolby E bitstream is also available via a dedicated output on the rear panel.

The audio inputs to the Encoder can be selected to come from the external digital audio inputs via the BNC or D-type connections on the rear panel or from embedded audio contained in the incoming SDI input. The outputs from the de-embedder can also be re-embedded into the video outputs, along with the encoder inputs.

The digital audio I/O connections are transformer-coupled balanced line interfaces and can be configured to be either 75? (AES 3ID) or 110? (AES 3) impedance through either a BNC or via the D-type connector. These connections are paralleled, allowing one type to be used per input or output.

It has a triple rate SDI receiver with automatic input rate detection and equalisation along with two re-clocked and individually buffered SDI outputs. It supports the full range of 3G, HD and SD standards from NTSC and PAL up to 1080p 60Hz.

The metadata used for the encoding process can be selected to come from either the external 9-pin D-type on the rear panel, from metadata embedded into the vertical blanking area of the video input (SMPTE 2020), or by settings stored internally.

There is also remote I/O available from the rear panel through a 25 way D-type connector. These are fully configurable.

The unit is controlled locally through the front panel display but can be remote controlled via an Ethernet connection using the Sonifex SCi software.

There is independent level control for every channel, which can be adjusted from -24dB through to +24dB in 0.5dB steps.

This product has settings that can be adjusted using the Sonifex SCi (Serial Control Interface) software.

Dolby® and the double-D symbol are registered trademarks of Dolby Laboratories


Technical Specification For RB-VHEDD8
SDI Specification
SDI Input: 1 x BNC, 3G/HD/SD-SDI
SDI Outputs: 2 x BNC, 3G/HD/SD-SDI, re-clocked
Impedance: 75?
Output Alignment Jitter: <0.2UI (3G <0.3UI)
Output Level: 800mV ±10%
Return Loss: <15dB at 1500MHz
SDI Supported Standards: 270Mbps, SMPTE-259M-C (SD)
1.485 or 1.4835Gbps, SMPTE-292M (HD)
2.97 or 2.967Gbps, SMPTE-424M (3G), SMPTE-425M-A
Supported Video Formats: 525/59.94 (SMPTE-125M)
625/50 (ITU-R BT.656)
720p/23.98, 24, 25, 29.97, 30, 50, 59.94, 60 (SMPTE-296M)
1035i/59.94, 60 (SMPTE-260M)
1080i/50, 59.94, 60 (SMPTE-274M)
1080p/23.98, 24, 25, 50, 59.94, 60 (SMPTE-274M)
1080pSF/23.98, 24, 25, 29.97, 30 (RP-211)
1080i/50 (SMPTE-295M)
1080p/50 (SMPTE-295M)
Embedded Audio: 24-bit, 48kHz synchronous
SMPTE-272M-C
SMPTE-299M
Metadata: SMPTE-2020M
SMPTE-RDD06, 9-Pin D-type
Delay Specification
Video Delay: 1 frame when frame rate <= 30 fps, 2 frames when frame rate > 30 fps.
Adjustment: +/- 10 ms.
Audio Specifications
Output Sample Rate: 48kHz
Input Sample Rates: CH1/2 & CH3/4: 32-192kHz
CH5/6 & CH7/8: 32-48kHz
Input & Output Impedance: 75?/110? selectable
Signal Level (un-terminated): Unbalanced: 1Vp-p ±20%
Balanced: 6.6Vp-p ±20%
Digital Audio I/O:
Inputs:
8 x digital audio input channels via
4 x BNCs or 25 way D-type socket (AES3)
Outputs: 2 output channels via 1 x BNC or 25 way D-type socket (AES3)
Digital Audio Connectors: 5 x BNC
1 x 25-way D-type socket
LTC Input: 1 x BNC (not used)
Operational Control
Display: Vacuum fluorescent display
System Navigation: Rotary selector with integral push-switch
Additional Connections
Ethernet Port: 10/100Mbps, RJ-45
Remote Input/Output Port: 25-way ‘D’-type socket
Power Supply: Universal filtered IEC, continuously rated 85-264VAC
@47-63Hz, fused
Fuse Rating: Anti-surge fuse 2A 20 x 5mm
Physical Specifications
Dimensions (Raw): 48cm (W) x 15.8cm (D*)x 4.2cm (H)
19” (W) x 6.2” (D*) x 1.7” (H) (1U)
Dimensions (Boxed): 59cm (W) x 27.5cm (D) x 11cm (H)
23.2” (W) x 10.8” (D) x 4.3” (H)
Weight: Nett: 1.8kg Gross: 2.3kg
Nett: 4.0lb Gross: 5.1lb
* Note that this product is deeper than standard Redboxes
Equipment Type
RB-VHEDD8 3G/HD/SD-SDI Dolby® E encoder
Accessories
RB-RK3 1U Rear panel rack kit for large Redboxes

Download user manual (PDF format)

Most computers have Adobe Reader as standard, if not download it from the link below.

Hire/Day ex VAT: £75.00
Hire/Week ex VAT: £300.00

Quantity:


For best possible price why not ask for a quote
Television, Film Services, sound and vision equipment for hire
Television Film Services
Middle Ollerbrook House
Edale
Derbyshire
S33 7ZG
T: 0114 249 5902
F: 0114 221 4496
M: 07831 666 899
E: info@tfsuk.com